Philips StraightCare Essential ThermoProtect Straightener (BHS378/03)
- Keratin-infused ceramic plates, six LED settings from 160 to 230 °C
- Auto shut-off after 60 minutes
- 110 to 240 V; 2 year worldwide guarantee
best philips hair straightener: The Philips BHS378/03 is the place to begin, as it prints a 160 to 230 °C range and a shut off after 60 minutes. The BHS397/00 states a 210 °C maximum, while the BHS378/10, HP8318/00 and HP8339/00 leave out the range.
Method: specifications and warranty are read from brand pages and Amazon listings, last checked 10 Nov 2026. Nothing here is lab-tested. How we pick. Site facts.
Pages from Philips for these five straighteners disagree on what they print about heat. Two models give degrees, one gives six steps with no range, one names a temperature control, and one describes a constant temperature with an automatic setting, so a search for the best philips hair straightener turns on which numbers each page carries.
Six LED temperature settings spread across a printed span of 160 to 230 °C make up the clearest heat control in the group. This is the only one of the five that prints both the count and the span.
ThermoProtect technology is described as spreading heat across the plates to prevent overheating. That is a manufacturer claim, not the result of an independent test.
Philips says the straightener turns off by itself after 60 minutes, and no other model among the five states a shut off.
Plates are keratin infused ceramic. The supply is 110 to 240 V, and Philips describes a two year worldwide guarantee. The plate width and the cord length are not stated.
Two fixed settings, one at 190 °C and one at 210 °C, give the group its clearest ceiling.
The plates are keratin and titanium, measuring 29 x 90 mm, which is the only printed plate width among the five. The cord is 1.6 m long, the supply is 110 to 240 V, and the warranty is described as worldwide for two years.
Philips states no automatic shut off for it.
Plates are keratin infused ceramic, and there are six LED temperature settings with a two year warranty.
It prints no range in degrees, no voltage and no shut off. Philips does not say where the warranty applies, unlike the BHS378/03 and the BHS397/00, whose cover is described as worldwide.
It carries keratin infused ceramic plates and a two year warranty.
No count of settings, range, voltage or shut off is printed. The word control tells a reader that the heat can be changed, but not by how much or in how many steps. As with the BHS378/10, Philips does not say where the warranty applies.
It describes a constant temperature and an automatic setting meant for gentler restyling. The Dual Care plates are named, though the material is not, and the warranty is two years.
No plate material, plate width, range, voltage or shut off is printed. Philips also leaves the reach of the warranty unstated for this model.
As an Amazon Associate I earn from qualifying purchases. Read the disclosure.
| Model | Plates | Temperature | Auto shut off |
|---|---|---|---|
| BHS378/03 (start here) | Keratin infused ceramic | Six settings, 160 to 230 °C | After 60 minutes |
| BHS397/00 | Keratin and titanium | 190 and 210 °C | Not stated |
| BHS378/10 | Keratin infused ceramic | Six settings, no range | Not stated |
| HP8318/00 | Keratin infused ceramic | Control, no range | Not stated |
| HP8339/00 | Not stated | Automatic setting, no range | Not stated |
| Model Benchmark | 5 verified models compared | 5 verified models compared | 5 verified models compared |
Heat control is where the five differ most. A phrase such as temperature control says that the heat can change, and it does not say by how much.
A count of settings alone does not allow a comparison either, since six steps between two low temperatures are very different from six steps across a wide span.
The BHS378/03 and the BHS397/00 print their numbers, and the three others leave the question open. Those three describe their heat in different ways, as six steps, a control and a constant temperature with an automatic setting.
None of the descriptions tells whether the lowest step is gentle or whether the highest is hotter than the BHS397/00 ceiling.
Keratin infused ceramic plates are named for three of the five models. The BHS397/00 pairs keratin with titanium, and the HP8339/00 mentions Dual Care plates without naming the material.
The wording keratin infused is a coating description from the manufacturer, and none of the Philips material gives an independent measure of what it does to hair.
Electrical supply is printed for two models, the BHS397/00 and the BHS378/03, both at 110 to 240 V. That range covers the mains supply in India. The other three models print no supply figure.
Cord length appears for the BHS397/00 only, and the other four give no length.
Warranty terms are printed more consistently, with Philips listing two years wherever it states one. Two models describe the cover as worldwide, and the rest do not say where it applies.
Philips states an automatic shut off for one of these five models, the BHS378/03, which turns off by itself after a set time of use. The other four pages do not mention the feature.
Where Philips prints a supply figure, it covers a wide range that includes Indian mains power. Two of the five models print it, so the rating label on the unit settles the rest.
Keratin infused is a coating description from Philips, used for ceramic plates on three models here. The brand gives no independent measure of what the infusion does to hair.
The most direct way is to read the degrees printed, since a count of settings or the word control does not show how hot the plates get. Only two of the five Philips models print a temperature figure.